Home > Signaling Solutions > Audible Alarms > Sounders > PATROL Series PA 5

PATROL Series PA 5 - Horns/Sirens/Sounders


PATROL Series PA 5

105 dB, 80 tones, 4 stages

• Electronic, solid-state design
• No moving parts
• Multiple alarms tones
• Operates in any climate
• Easy to install
• Surface or flush-panel mount
• Satisfies many requirements
• New 10-Year Warranty

105 dB Industrial Horn/Siren/Sounder

Tone Generator - Sound Capsule Type


• 105 dB (A) nominal sound pressure level
• 80 alarm tones with 4 stages
• Emit different tones based on alarm circumstance
• Internal volume control
• Polycarbonate/ABS blend housing
• UL Type 4/4X, IP 66 ingress protection
• 5.3 inch (135 mm) h x 6.4 inch (163 mm) w x 5.2 inch (132 mm) d
• Certifications: UL, cUL, MED, CE, VdS, GL, EN 54-3
• Contact factory for option part numbers not listed below

Catalog Pages with Drawings and Specifications

Sales Brochure Details Features, Advantages, and Benefits

Operating Manual

Educational Video

Guide Specifications

Sample Tones  



Also available with integrated flashing strobe light as Model PA X 5.

Series

PA 5 : 105 dB, 80 tones, 4 stages

Housing/Voltage

10 to 57 VDC

104 to 126 VAC

207 to 253 VAC

Grey

 

PA 5
10 to 57 VDC

23350630055

$195.00 each

PA 5
104 to 126 VAC

23350150055

$195.00 each

PA 5
207 to 253 VAC

23350100055

$195.00 each

Red

 

PA 5
10 to 57 VDC

23350630000

$195.00 each

PA 5
104 to 126 VAC

23350150000

$195.00 each

PA 5
207 to 253 VAC

23350100000

$195.00 each

Accessories

Enclosure Coupler


Click to
Enlarge Image

28300000003

$18.25 each

The Enclosure Coupler permits installation to an enclosure surface with a single, 3/4-inch drilled hole through which power/control leads are also routed. Includes sealing washer, brass coupler with nut, and plastic enclosure washer. Maintains Type 4/4X, IP 66 enclosure rating.

Surface Mount Gasket

28300000005

$17.00 each

The Surface Mount Gasket permits installation onto an enclosure surface while maintaining the Type 4/4X, IP 66 enclosure rating. When mounting the sounder in this fashion, the mounting screws should pass through the inside of the base box, rather than the exterior mounting flange holes.

Panel Mount Kit

28300000008

$20.00 each

The Panel Mount Kit permits flush installation through a rectangular cutout in a panel. Includes self-tapping stainless steel screws with sealing washers, an electrical connector that mates to the sounder, and installation instructions.

Tamper-proof Plugs
(set of 4)

28300000002

$15.00 each

The Tamper-proof Plugs install into the top of the plastic 3/8-turn fasteners to permanently seal the housing from unauthorized tampering. Once installed, they cannot be removed except for drilling which then destroys the fasteners, however they can be replaced.