SIDE MOUNT COOLING UNITS
Our DTS 3061 (NEMA Type 3R/4) outdoor cooling units are ideal for small enclosures and for the cooling of hot spots in larger control cabinets. Housing: galvanized sheet steel. Cover: electrostatically powder coated RAL 7035 (light grey); for ANSI 61 grey use part no. ending in …351
ERP Efficiency Certified
As a component of the Kyoto Protocol to reduce carbon monoxide emissions, the European Energy Related Products (ERP) Directive includes an efficiency rating for fans. Pfannenberg proudly utilizes components which adhere to these requirements.
High Airflow Backward Curve Impeller Fan
Provides high airflow in a long lasting, single bearing design. Outperforms typical two-bearing blowers with nearly twice the lifespan.
Closed Loop Design
Designed to isolate the external ambient air from the internally conditioned air eliminating the risk of contaminants entering the cabinet.
Thermal Overload Protection
Compressor and fan motors are outfitted with integral temperature switches to shut down the unit in the event of excessive temperature. This increases the operating life of the compressor by preventing thermal overload trips.
Pressure Overload Protection
High pressure cutout switch ensures safety by shutting off the compressor in the event of excessive pressure appearing in the refrigeration circuit.
Utilizes HFC-free R134a refrigerant versus a blended refrigerant for easier service and minimized negative impact to the environment.
Hermetically Sealed Compressor
The absence of any refrigerant fill valves eliminates leak paths. Recharging is never needed. 100% cooling capacity efficiency is ensured.
Highest in Class Capacity
The compact, 10 inch width is ideal for small enclosures with a relatively small heat load. The integral power cord helps simplify installation. An integral ingress filter is provided on type 12/3R/4 versions.
Outdoor and wash-down units have a special coating on pipes and coils on the ambient side of the unit to provide maximum protection from saltwater, sour gas, and other corrosive substances.
Optimized Condenser Design
The wide fin spacing is less susceptible to clogging from dirt buildup which can cause the unit to work harder and hamper efficiency.
Easy to Maintain
includes an integrated Pfannenberg PFA Exhaust Filter for simple replacement of the filter.
Thermal Expansion Valve
Regulates the flow of refrigerant based on thermal demand for efficient performance over the entire operating temperature range.
High Ambient Performance
The DTS 3000 Series Cooling Units were designed utilizing high temperature compressors and larger condensers. Both the indoor NEMA Type 12 units and outdoor units perform very well in environments that require cooling where the maximum ambient temperature is 131° F.
Powder coated steel or stainless steel cover designed for manufacturing environments. Easily painted to match enclosure or machine.
Technical Data Overview
|DTS 3061||115 V||230 V||400/460 V|
|POWER CONSUMPTION (W)||789||760|
|NOMINAL (RUN) CURRENT* (@35A/35A)||3.12||1.52||0.76|
|FUSE (max.)** CLASS CC||5.6||2.8||1.4|
|NOISE LEVEL*** dB(A)||<64|
|WEIGHT lb (kg)(without packaging)||62 (28)||66 (30)|
|DIMENSIONS||20.15 in. (512 mm) h x 10 in. (254 mm) w x 10.8 in. (274 mm) d|
|*For the MCA (Maximum Current Ampacity) value per UL, please consult product technical datasheets available above. *** (According to EN ISO 3741)
Datasheets & Downloads
|AVAILABLE VOLTAGES||115 V||230 V||460 V|
|ADAPTER PLATES FOR OEM COOLING UNITS||https://www.pfannenbergusa.com/spare-parts/|
How to use this chart:
Example: @ 95°F (ambient, X-axis), @ 95°F (internal, diagonal lines)
= 2700 Btu/h cooling capacity (Y-axis)
|AMBIENT TEMPERATURE RANGE||+ 46°F … + 131°F / + 0°C … + 55°C|
|CONTROL RANGE (adjustable)||SC||+ 50°F … + 104°F / + 10°C … + 40°C; factory setting + 95°F / + 35°C|
|CONDENSATE MANAGEMENT||condensate drain|
|PROTECTION SYSTEM ACCORDING TO NEMA TYPE||NEMA Type 3R/4(against enclosure when properly installed)|
|NEMA 1 towards the surroundings when properly installed|
Subject to technical amendments and misprints.
- INDUSTRY SOLUTIONS
- THERMAL MANAGEMENT
- SIGNALING TECHNOLOGIES
- LIQUID COOLING
- Why is a Thermal Mangement Plan for Enclosures Important?September 28, 2023 - 9:51 AM
- Pfannenberg Named a Top 20 Fast Track CompanySeptember 12, 2023 - 2:11 PM
- Pfannenberg’s Compact Packaged Chillers – Efficient and ReliableSeptember 6, 2023 - 4:04 PM
- Pfannenberg Announces M12 Compatible Audible and Visual Signaling SolutionsAugust 7, 2023 - 9:56 AM