PF Series EMC Filterfans & Exhaust Filters

Protect your sensitive electronics from electromagnetic interference when cooling with Filterfans®. The use of a Filterfan® for thermal management requires an opening to be cut into the cabinet. These openings can allow electromagnetic radiation to pass in or out unhindered.

Pfannenberg’s EMC Filterfans® offer the widest range of protection against electromagnetic interference. We offer several combinations of EMC Filterfans® and exhaust filters for air flow rates from 17 to 560 CFM2.

To better protect the environment, our EMC Filterfans® and exhaust filters do not use metalized plastics, because these are difficult to recycle.

EMC – Electromagnetic Compatibility

In standards, electromagnetic compatibility, or ‘EMC’ for short, is defined as the ability of a component, device or system to function satisfactorily under the influence of electromagnetic fields in its surroundings, without influencing its surroundings, to which other electrical equipment also belongs, in an impermissible way. We guarantee that our EMC shielded Filterfans® provide protection against electromagnetic interference by ensuring continuity between the shielding part of the fan and the metal structure of the cabinet based on the attenuation characteristics below:

Attenuation at 30 MHz approx. 71 dB
Attenuation at 400 MHz approx. 57 dB
Measured in accordance with EN 50 147-1 (1996): absorber rooms, part 1, measurement of screening attenuation.


Superior Metal Shielding

Unequaled worldwide: contact surfaces without beryllium-copper seal!


No elaborate reworking of the cut-out

• No adhering of copper tape or similar aids
• No time-consuming scratching off of coatings in order to ensure a good contact
• Contact is made via the cut edge of the cut-out for the Filterfans® or exhaust filter

Pfannenberg’s EMC Filterfans and Exhaust Filters

Technical Data Overview
TYPEPART NUMBER (115 V, Lt. Grey)REPLACEMENT FILTERMATAIR FLOW RATE CMF2 (Type 12 / IP 55)RATED VOLTAGECUT OUT DIMENSIONS (HxW)3 in (mm)APPROVALS
*Please consult factory for additional options and part numbers
PF SERIES EMC FILTERFANS 4.0
PF 11000 EMC11811510551861160002917115V, 230V, 24 VDC3.66 x 3.66 (93 x 93)UL, cUL, CE, (on request: GOST)
PF 22000 EMC118221530551861160003438115V, 230V, 24 VDC4.96 x 4.96 (126 x 126)
PF 32000 EMC118321530551861160003565115V, 230V, 24 VDC7.01 x 7.01 (178 x 178)
PF 42500 EMC118421530551861160003694115V, 230V, 24 VDC8.82 x 8.82 (224 x 224)
PF 43000 EMC1184315305518611600036155115V, 230V, 24 VDC8.82 x 8.82 (224 x 224)
PF 65000 EMC1186515305518611600037297115V, 230V11.50 x 11.50 (292 x 292)
PF 66000 EMC1186615305518611600037462115V, 230V11.50 x 11.50 (292 x 292)
PF 67000 EMC1186715305518611600037560115V, 230V, 400/460 V11.50 x 11.50 (292 x 292)
PF SERIES EMC EXHAUST FILTERS
PFA 10000 EMC1171000105518611600029N/AN/A3.66 x 3.66 (93 x 93)UL, cUL, CE, (on request: GOST)
PFA 20000 EMC11720004055186116000344.96 x 4.96 (126 x 126)
PFA 30000 EMC11730004055186116000357.01 x 7.01 (178 x 178)
PFA 40000 EMC11740004055186116000368.82 x 8.82 (224 x 224)
PFA 60000 EMC117600040551861160003711.50 x 11.50 (292 x 292)
Datasheets & Downloads
TYPEMANUALDRAWINGSMODEL
PF SERIES EMC FILTERFANS 4.0
PF 11000 EMC
PF 22000 EMC
PF 32000 EMC
PF 42500 EMC
PF 43000 EMC
PF 65000 EMC
PF 66000 EMC
PF 67000 EMC
PF SERIES EMC EXHAUST FILTERS
PFA 10000 EMC
PFA 20000 EMC
PFA 30000 EMC
PFA 40000 EMC
PFA 60000 EMC